View NC7SZ74_415861.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NC7SZ74 TinyLogic UHS D-Type Flip-Flop with Preset and Clear
July 2001 Revised February 2002
NC7SZ74 TinyLogic UHS D-Type Flip-Flop with Preset and Clear
General Description
The NC7SZ74 is a single D-type CMOS Flip-Flop with preset and clear from Fairchild's Ultra High Speed Series of TinyLogic in the space saving US8 package. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V-5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. The output tolerates voltages above VCC in the 3-STATE condition. The signal level applied to the D input is transferred to the Q output during the positive going transition of the CLK pulse.
Features
s Space saving US8 surface mount package s Ultra High Speed; tPD 2.6 ns Typ into 50 pF at 5V VCC s High Output Drive; 24 mA at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Power down high impedance inputs/output s Overvoltage tolerant inputs facilitate 5V - 3V translation s Patented noise/EMI reduction circuitry implemented
Ordering Code:
Order Number Package Product Code Number Top Mark Z74 Package Description Supplied As
NC7SZ74K8X MAB08A
8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel
TinyLogic is a trademark of Fairchild Semiconductor Corporation.
(c) 2002 Fairchild Semiconductor Corporation
DS500499
www.fairchildsemi.com
NC7SZ74
Pin Descriptions
Pin Names D CK CLR Q, Q PR Description Data Input Clock Pulse Input Direct Clear Input Flip-Flop Output Direct Preset Input
Logic Symbol
IEEE/IEC
Connection Diagrams Truth Table
Inputs CLR L H L H H H PR H L L H H H D X X X L H X CK X X X Outputs Function Q L H H L H Qn Q H L H H L Qn
X = Immaterial
Clear Preset -- -- -- No Change

H = HIGH Logic Level L = LOW Logic Level = Rising Edge
Z = High Impedance Qn = No change in data = Falling edge
(Top View) Pin One Orientation Diagram
AAA represents Product Code Top Mark - see ordering code Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram).
www.fairchildsemi.com
2
NC7SZ74
Absolute Maximum Ratings(Note 1)
Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) DC Input Diode Current (IIK) VIN < 0V DC Output Diode Current (IOK) VOUT < 0V DC Output (IOUT) Source/Sink Current DC VCC/GND Current (ICC/IGND) Storage Temperature Range (TSTG) Junction Temperature under Bias (TJ) Junction Lead Temperature (TL) (Soldering, 10 seconds) Power Dissipation (PD) @ +85C 260C 180 mW
-0.5V to +7.0V -0.5V to +7.0V -0.5V to +7.0V -50 mA -50 mA 50 mA 50 mA -65C to +150C
150C
Recommended Operating Conditions (Note 2)
Power Supply Operating (VCC ) Data Retention Input Voltage (VIN) Output Voltage (VOUT) Active State 3-STATE Input Rise and Fall Time (tr, tf) VCC = 1.8V, 2.5V 0.2V VCC = 3.3V 0.3V VCC = 5.5V 0.5V Operating Temperature (TA) Thermal Resistance (JA) 0 to 20 ns/V 0 to 10 ns/V 0 to 5 ns/V 0V to VCC 0V to 5.5V 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V
-40C to +85C
350 C/W
Note 1: Absolute Maximum Ratings: are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Note 2: Unused inputs must be held HIGH or LOW. They may not float.
DC Electrical Characteristics
Symbol VIH VIL VOH Parameter HIGH Level Control Input Voltage LOW Level Control Input Voltage HIGH Level Control Output Voltage VCC (V) 2.3 to 5.5 1.65 to 1.95 2.3 to 5.5 1.65 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 VOL LOW Level Control Output Voltage 1.65 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 IIN IOFF ICC Input Leakage Current Power Off Leakage Current Quiescent Supply Current 0 to 5.5 0.0 1.65 to 5.5 0.08 0.10 0.15 0.22 0.22 1.55 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 1.65 2.3 3.0 4.5 1.52 2.15 2.8 2.68 4.2 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 0.1 1.0 1.0 Min 0.75 VCC 0.25 VCC 0.3 VCC 1.55 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 1.0 10 10.0 A A A 0 VIN 5.5V VIN or VOUT = 5.5V VIN = 5.5V, GND V VIN = VIH IOL = 4 mA IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA IOL = 100 A V VIN = VIH IOH = -4 mA IOH = -8 mA IOH = -16 mA IOH = -24 mA IOH = -32 mA IOH = -100 A 1.65 to 1.95 0.75 VCC TA = +25C Typ Max TA = -40C to +85C Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC Max Units V V Conditions
3
www.fairchildsemi.com
NC7SZ74
AC Electrical Characteristics
Symbol fMAX Parameter Maximum Clock Frequency VCC (V) 1.8 0.15 2.5 0.2 3.3 0.3 5.0 0.5 3.3 0.3 5.0 0.5 tPLH tPHL Propagation Delay CK to Q, Q 1.8 0.15 2.5 0.2 3.3 0.3 5.0 0.5 3.3 0.3 5.0 0.5 tPLH tPHL Propagation Delay CLR, PR, to Q, Q 1.8 0.15 2.5 0.2 3.3 0.3 5.0 0.5 3.3 0.3 5.0 0.5 tS Setup Time, CK to D 1.8 0.15 2.5 0.2 3.3 0.3 5.0 0.5 3.3 0.3 5.0 0.5 tH Hold Time, CK to D 1.8 0.15 2.5 0.2 3.3 0.3 5.0 0.5 3.3 0.3 5.0 0.5 tW Pulse Width, CK, PR, CLR 1.8 0.15 2.5 0.2 3.3 0.3 5.0 0.5 3.3 0.3 5.0 0.5 tREC Recover Time CLR, PR to CK 1.8 0.15 2.5 0.2 3.3 0.3 5.0 0.5 3.3 0.3 5.0 0.5 TA = +25C Min 75 150 200 250 175 200 2.5 1.5 1.0 0.8 1.0 1.0 2.5 1.5 1.0 0.8 1.0 1.0 6.5 3.5 2.0 1.5 2.0 1.5 0.5 0.5 0.5 0.5 0.5 0.5 6.0 4.0 3.0 2.0 3.0 2.0 8.0 4.5 3.0 3.0 3.0 3.0 6.5 3.8 2.8 2.2 3.4 2.6 6.5 3.8 2.8 2.2 3.4 2.6 12.5 7.5 6.5 4.5 7.0 5.0 14.0 9.0 6.5 5.0 7.0 5.0 Typ Max TA = -40C to +85C Min 75 150 200 250 175 200 2.5 1.5 1.0 0.8 1.0 1.0 2.5 1.5 1.0 0.8 1.0 1.0 6.5 3.5 2.0 1.5 2.0 1.5 0.5 0.5 0.5 0.5 0.5 0.5 6.0 4.0 3.0 2.0 3.0 2.0 8.0 4.5 3.0 3.0 3.0 3.0 ns CL = 15 pF RD = 1 M S1 = Open CL = 50 pF RD = 500 , S1 = Open Figures 1, 4 ns CL = 15 pF RD = 1 M S1 = Open CL = 50 pF RD = 500 , S1 = Open Figures 1, 5 ns CL = 15 pF RD = 1 M S1 = Open CL = 50 pF RD = 500 , S1 = Open Figures 1, 4 ns CL = 15 pF RD = 1 M S1 = Open CL = 50 pF RD = 500 , S1 = Open Figures 1, 4 13.0 8.0 7.0 5.0 7.5 5.5 14.5 9.5 7.0 5.5 7.5 5.5 ns CL = 15 pF RD = 1 M S1 = Open CL = 50 pF RD = 500 , S1 = Open Figures 1, 3 ns CL = 15 pF RD = 1 M S1 = Open CL = 50 pF RD = 500 , S1 = Open Figures 1, 3 MHz CL = 15 pF RD = 1 M S1 = Open CL = 50 pF RD = 500, S1 = Open Figures 1, 5 Max Units Conditions Figure Number
Capacitance (Note 3)
Symbol CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance (Note 4) Parameter Typ 3 4 10 12
Note 3: TA = +25C, f = 1MHz. Note 4: C PD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD ) at no output loading and operating at 50% duty cycle. (See Figure 2) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICCstatic).
Max
Units pF pF pF VCC = 0V VCC = 0V VCC = 3.3V VCC = 5.0V
Conditions
www.fairchildsemi.com
4
NC7SZ74
AC Loading and Waveforms
CL includes load and stray capacitance Input PRR = 1.0 MHz; tw = 500 ns
CP Input = AC Waveform; tr = tf = 2.5 ns; CP Input PRR = 10 MHz; Duty Cycle = 50% D Input PRR = 5MHz; Duty Cycle = 50%
FIGURE 1. AC Test Circuit
FIGURE 2. ICCD Test Circuit
FIGURE 3. AC Waveforms
FIGURE 4. AC Waveforms
FIGURE 5. AC Waveforms
5
www.fairchildsemi.com
NC7SZ74
Tape and Reel Specification
TAPE FORMAT Package Designator K8X Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Tape Section Leader (Start End) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed
REEL DIMENSIONS inches (millimeters)
Tape Size 8 mm
A 7.0 (177.8)
B 0.059 (1.50)
C 0.512 (13.00)
D 0.795 (20.20)
N 2.165 (55.00)
W1 0.331 + 0.059/-0.000 (8.40 + 1.50/-0.00)
W2 0.567 (14.40)
W3 W1 + 0.078/-0.039 (W1 + 2.00/-1.00)
www.fairchildsemi.com
6
NC7SZ74 TinyLogic UHS D-Type Flip-Flop with Preset and Clear
Physical Dimensions inches (millimeters) unless otherwise noted
8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide Package Number MAB08A
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 7 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com
www.fairchildsemi.com

▲Up To Search▲

Price & Availability of NC7SZ74

	To Download NC7SZ74 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .